Shenzhen Optfocus Technology Co., Ltd.
Shenzhen Optfocus Technology Co., Ltd. Focus on fiber optical telecommunication
Add to Cart
10/100M single fiber optic switch 1310nm 16 ports fiber switch with poe
Description
OFS-PE-GTDT16 with 16*10/100M PoE Ports + 1*1000M Ethernet Port, using high-quality high-speed network IC and the most stable POE chip, POE port meets 802.3af/at standard, this series of PoE Switch can be 10/100M Ethernet The network provides a seamless connection, and the PoE power port can automatically detect and power the powered devices that comply with the IEEE802.3af/at standards. The non-POE device intelligently detects no power and only transmits data.
PoE (Power over Ethernet) refers to the technology of providing dc Power supply to some IP-based terminals (such as IP telephone, wireless access AP, network camera, etc.) while transmitting data signals. These devices receiving dc Power supply are called receiving devices.
| Model | OFS-PE-GTDT16 | ||
| Connector Type | 16 Port 10/100M PoE + 1 Port 10/100/1000M Ethernet Uplink | ||
| Network Protocols | IEEE802.3 IEEE802.3u IEEE802.3x IEEE802.3ab | ||
| PoE Parameters | PoE Standard: IEEE802.3at (30W) and IEEE802.3af (15.4w) PoE compatibility: IEEE 802.3af/at adaptive PoE port output: DC52V Power Pin : 1/2(+) ; 3/6 (-) | ||
| DIP | VLAN: Port isolation mode. In this mode, the PoE ports (1-8) of the switch cannot communicate with each other, and can only communicate with the UP-link port. The port AI mode is turned on. | ||
| Default: Normal mode, all port can communicate with each other, the transmission distance is within 100 meters, the transmission rate is 10M / 100M adaptive; The port AI mode is closed. | |||
| Extend: Link extension mode, 1-8 ports PoE power supply and data transmission distance can be extended to 250 meters, the transmission rate becomes 10M, and the port AI mode is turned on. | |||
| Network Media | 10BASE-T: Cat 3,4,5 UTP(≤100 meter) 10BASE-T: Cat 6 UTP(≤250 meter) 100BASE-TX: Cat5 or more UTP (≤100 meter) | ||
| Power Supply | Power input: AC100-240V 50/60Hz, Output: 52V2.3A, Power Budget: 120W | ||
| Performance Specification | Bandwidth: 5.6Gbps | ||
| MAC Address: 2K | |||
| Packet Buffer Memory: 768K | |||
| Packet Forwarding Rate: 0.1488M pps/each port | |||
| Forwarding Mode: Store-And-Forward | |||
| Led indicator | PWR | Power supply indicator(Red) | Lighting:Powered Un-Light:No Power |
|
SW |
DIP indicator(Green) | OFF: Normal Vlan: Lighting Extend: Slow flash | |
|
1-10 |
RJ-45 ACT indicator(Green) | Lighting:Connecting Flashing:Data Transmit Un-Light:Disconnect | |
Company Profile
